Loading... Please wait...

Ethernet RS-232 device server

1.00 LBS
Calculated at checkout

Product Description

Ethernet RS-232 device server

Serial to 10/100 Ethernet gateway. Device server can act as a TCP/IP server or TCP/IP client. Pre-configured to connect APRS World, LLC products to our data.aprsworld.com Internet service.

Includes feet and screws for attaching to standard 35 mm (1.4 in) DIN rail. A #2 phillips (+) screwdriver is required to assemble. DIN rail not included.

Note: Does not come with DIN feet attached. Assembly required.

Package Includes

  • Device server
  • DIN rail mounting feet
  • North American AC adapter
  • 3 m (10 ft) Ethernet patch cord


rohs_check_53.png     made-in-USA.53.gif

Product Videos

How to Attach DIN Clips (00:48)
This short tutorial will show you how to attach your APRS World breakout board to a DIN rail, using our DIN rail mounting clip kit. First, attach the two DIN clips by hooking the rounded bottom portion of the clip around the rail (slight pause in video) and then pushing down on the other end to snap it into place. Line up the breakout board (slight pause in video) with the already placed clip to estimate the spacing for the second one. After attaching both clips, place the breakout board on top and line up the holes, adjusting width as needed. Using your #2 phillips screwdriver, tightly screw the breakout board onto the clips. Make sure the holes remain aligned as you do this. And you’re finished. Your breakout board is now mounted onto the DIN rail. For more products and information visit www.aprsworld.com
  • How to Attach ...
    This short tutorial will show you how to attach your APRS Worl...

Find Similar Products by Category

You Recently Viewed...