Loading... Please wait...

RJ-45 breakout board to screw terminals with DIN rail clips

Price:
$15.00
SKU:
APRS6574
Weight:
0.10 LBS
Shipping:
Calculated at checkout


Product Description

RJ-45 breakout board to screw terminals with DIN rail clips

Includes feet and screws for attaching to standard 35 mm (1.4 in) DIN rail. A #2 phillips (+) screwdriver is required to assemble.

Note: DIN rail pictured for reference, but not included.

Discounts available when ordering in quantity: 10% for quantities of 100 or more and 20% for quantities of 500 or more.

 

rohs_check_53.png    made-in-USA.53.gif

Product Videos

How to Attach DIN Clips (00:48)
This short tutorial will show you how to attach your APRS World breakout board to a DIN rail, using our DIN rail mounting clip kit. First, attach the two DIN clips by hooking the rounded bottom portion of the clip around the rail (slight pause in video) and then pushing down on the other end to snap it into place. Line up the breakout board (slight pause in video) with the already placed clip to estimate the spacing for the second one. After attaching both clips, place the breakout board on top and line up the holes, adjusting width as needed. Using your #2 phillips screwdriver, tightly screw the breakout board onto the clips. Make sure the holes remain aligned as you do this. And you’re finished. Your breakout board is now mounted onto the DIN rail. For more products and information visit www.aprsworld.com
  • How to Attach ...
    This short tutorial will show you how to attach your APRS Worl...

You Recently Viewed...