This short tutorial will show you how to attach your APRS World breakout board to a DIN rail, using our DIN rail mounting clip kit. First, attach the two DIN clips by hooking the rounded bottom portion of the clip around the rail (slight pause in video) and then pushing down on the other end to snap it into place. Line up the breakout board (slight pause in video) with the already placed clip to estimate the spacing for the second one. After attaching both clips, place the breakout board on top and line up the holes, adjusting width as needed. Using your #2 phillips screwdriver, tightly screw the breakout board onto the clips. Make sure the holes remain aligned as you do this. And you’re finished. Your breakout board is now mounted onto the DIN rail. For more products and information visit www.aprsworld.com