Loading... Please wait...

Temperature and relative humidity sensor, 2 m (6 ft) cable

0.25 LBS
Calculated at checkout

Product Description

Temperature and relative humidity sensor

Our temperature and relative humidity sensor is high quality and low cost. We utilize a precision calibrated sensor module and surround it with tough interface electronics and a rugged potted case. The sensor can measure temperature from -26°C to 70°C (-15°F to 158°F) and relative humidity from 3% to 100%. The sensor comes standard with a 2 m (6 ft) shielded cable with wire leads. Sensor is compatible with our Wind Data Logger.

Technical Specifications


  • Range: -27°C to 70°C (-15°F to 158°F)
  • Accuracy: ± 0.5°C typical
  • Response time: 50 seconds in slow moving air

Relative Humidity

  • Range: 3% to 100% non-condensing
  • Accuracy: ± 2% RH typical
  • Linearity: ± 0.5% RH
  • Hysteresis: ± 1% RH, maximum
  • Temperature coefficient: ± 0.008% RH / °C, maximum
  • Response time: 25 seconds in slow moving air at 25°C (77°F)
  • Recovery time (from condensation): 10 seconds
  • Stability: ± 0.5% RH per year

Electrical Specifications

  • Input voltage: 4 to 6 volts DC

Weight and Dimensions

  • Weight: 106 g (3.7 oz) including 3 m (10 ft) cable
  • Dimensions: 35 mm wide x 26 mm tall x 26 mm deep (1 in x 1 in x 1.4 in) not including cable


For more technical specifications, please visit: http://www.aprsworld.com/sensors/tempRH/.

rohs_check_53.png     made-in-USA.53.gif

Find Similar Products by Category

You Recently Viewed...