Loading... Please wait...

AS Richards, wind sensor mast adapter

1.05 LBS
Calculated at checkout

Product Description

AS Richards, wind sensor mast adapter

Arklay S. Richards Compact High Speed Wind Sensors

Off Grid Options and APRS World, LLC are proud to add Arklay S. Richards Compact High Speed Wind Sensors to our product line. Options include both reed switch pulse output and AC frequency output anemometers along with heated sensors and anti-stick coated anemometer rotors. Specifications are listed below. Please note that only the switch pulse output anemometers are compatible with APRS World, LLC's Wind Data Logger. These are special order items that may require a two week lead time prior to shipping.


Many applications require only a single anemometer or wind vane mounted on a mast or pole. For this type of application the mast adapter is available. The adapter is machined from solid 316ss bar stock for strength and corrosion resistance. The adapter has a 12.7 mm (0.5 in) O.D. sensor mount on one end and a female 1" NPT thread on the other. This allows the use of standard pipe and pipe fittings to install the sensor. The overall length of the mast adapter is 152.4 mm (6 in) and the 12.7 mm (0.5 in) O.D. sensor mount section is 76.2 mm (3 in). The outside surfaces are polished to a mirror finish.

Technical Specifications

Materials of Construction and Finish

  • One piece solid construction: Solid hex, 316 stainless steel
  • 1" NPT female thread inside 38 mm (1.5 in) hex: 316 stainless steel
  • Finish: Bright high polished external finish

Physical Dimensions and Weight

  • Sensor mounting post height: 76.2 mm (3 in)
  • Mast adapter overall length: 152.4 mm (6 in)
  • Weight: 476.27 g (1.05 lbs)

Tools Required for Mounting and Installation

  • Pipe: 1" pipe for vertical mast with male thread
  • Open end: 38 mm (1.5 in) open end wrench or large adjustable wrench



You Recently Viewed...